Misfueled Vehicles and “Limp Mode”

Petrol in diesel car

Limp Mode In Cars – Why It Happens And How To Fix

Most drivers have experienced limp mode at some point. You’re driving along, and suddenly your car starts to feel like it’s dragging a weight behind it. This can be very frustrating for drivers and can sometimes lead to accidents. In this article, we’ll discuss what limp mode in cars is, why it happens, and how to fix it. We’ll also cover some of the most common reasons for limp mode in cars. Keep reading to learn more!

What Is Limp Mode In Cars?

Limp mode is a safety feature found in many modern cars. It is designed to protect the engine from damage when there is a problem with the emission control system. When the car goes into limp mode, the engine will run at a lower power to prevent excessive pollution. This can cause the car to feel sluggish and may even prevent it from reaching high speeds. In some cases, the car may need to be towed to a repair facility. The limp mode in cars is triggered when the engine computer detects a problem with the emission control system. The computer will then reduce the amount of power that the engine produces. This helps to prevent damage to the catalytic converter and other components. It also reduced emissions of harmful pollutants. In most cases, a limp mode can be cleared by restarting the engine. However, if the problem is not fixed, the car may continue to run in limp mode until it is repaired.

Limp mode in car

6 Reasons Why Does Limp Mode In Cars Happen?

There are many reasons why a car may go into limp mode. Here we discussed 6 reasons so far:

1) Emission Control System:

One common reason is that the emission control system has detected a problem and is trying to prevent further damage to the engine. This can be caused by a faulty oxygen sensor, catalytic converter, or exhaust gas recirculation valve. Another possibility is that the air filter is dirty and needs to be replaced. If any of these problems occur, it is important to have the car checked by a mechanic as soon as possible to avoid further damage.

2) Fuel System:

One of the most common reasons a car goes into limp mode is a problem with the fuel system. If the fuel pump isn’t working properly or there is a blockage in the fuel lines, the engine may not be getting enough fuel. This can cause it to run rough and eventually go into limp mode.

3) You Put Diesel In A Petrol Car:

If you accidentally put diesel fuel in a petrol car, it can cause the engine to go into limp mode. This is because the diesel fuel will not ignite properly in the engine and can cause damage. If this happens, you will need to have the car towed to a mechanic to have the fuel system flushed and the engine repaired.

4) Ignition System:

Another common cause of car limp mode is an ignition system issue. If the spark plugs are fouled, or the ignition coil is failing, it can prevent the engine from starting. This can also cause the engine to run rough and eventually go into limp mode.

5) A Faulty Oxygen Sensor:

A faulty sensor can also cause a car to go into limp mode. The most common sensors that can fail are the mass air flow or throttle position sensors. If one of these sensors is not working properly, it can cause the engine to run lean or rich and eventually go into limp mode.

6) Catalytic Converter:

If the catalytic converter is damaged or blocked, it can cause the engine to go into limp mode. The catalytic converter helps to convert pollutants into harmless gases, so if it’s not working properly, it can cause exhaust gases to build up and eventually overwhelm the engine.

7) Transmission:

The transmission is another common cause of limp mode in cars. If there is a problem with the transmission, it can prevent the vehicle from shifting gears properly. This can lead to slippage and eventually cause the car to go into limp mode. These are some of the most common reasons a car may go into limp mode. If you’re having trouble diagnosing the problem, it’s always best to consult a professional mechanic.

BONUS: How To Fix Limp Mode In Cars?

If your car goes into limp mode, here are some steps you can take to try and fix the problem:

1) Pull Over To A Safe Location.

If your car goes into limp mode, you should first pull over to a safe location. Once you’re safely off the road, you can assess the situation and determine what might be causing the problem. A few different things can cause a car to go into limp mode, so it’s important to diagnose the issue before trying to fix it.

2) Check The Engine:

An issue with the engine is one of the most common reasons for a car to go into limp mode. If you think this might be the problem, there are a few things you can check. First, check the oil level and make sure it’s full. If it’s low, topping it off may fix the problem. You should also check for any leaks or other engine issues that could be causing the problem.

3) Check The Transmission:

If the transmission is the issue, there are a few things you can do to try and fix it. First, check the transmission fluid level and make sure it’s full. If it’s low, topping it off may fix the problem. You’ll likely notice some strange noises coming from the engine area. You should also check for any leaks or other transmission issues that could be causing the problem.

4) Call A Mechanic:

If you’re unable to identify or fix the problem yourself, it’s best to call a mechanic. They will be able to diagnose and fix the issue more quickly and efficiently than you would be able to on your own. In some cases, the limp mode can be caused by something as simple as a loose wire or blown fuse. However, it’s always best to have a professional take a look if you’re unsure what’s causing the problem.

Conclusion

You now know what limp mode is and some of the reasons why it may engage. If your car goes into limp mode, don’t panic! Check for any error codes and try restarting your engine. If that doesn’t work, then you’ll need to get your car towed to a nearby mechanical workshop. We hope this article has helped shed some light on the topic of limp mode. If you have any more questions or concerns, please don’t hesitate to contact us.

More information

 

Nowadays, with vehicles becoming more advanced and sophisticated, we more often run into situations where a misfueled vehicle will go into “limp mode” where the engine will not rev above a certain amount (usually 2,000 or 3,000 RPM).

This is the computer in the vehicle not clearly understanding what the problem is and deciding that the best thing to do would be to not drive it. Limp mode allows you to move the vehicle off of a busy street, or sometimes get to a local garage, so that the problem can be diagnosed and fixed.

If a vehicle has been misfueled and run on the contaminated fuel it will often go into limp mode. Once the fuel drain is done and all the lines have been cleaned you will often be able to reset the limp mode by leaving the vehicle off for a while.

This can reset the sensors and central computer. However, there are some makes and models where this doesn’t happen. In these cases it is necessary to plug the vehicle into a diagnostic machine and have the fault codes read and cleared.

Fortunately, all Fuel Fixer fuel technicians carry these tool and are able to reset any codes that arise as a result of misfueling.

So, if you have misfueled your car and it has gone into limp mode call Fuel Fixer. We get you going again fast!

2 thoughts on “Misfueled Vehicles and “Limp Mode””

  1. Put about 18 litres petrol into my 2010 1.7 diesel zafira . the light had only just come on. drove the 10 miles home no problem but went to start couple hours later and it wouldn’t start it was then I realised my mistake. Do you think there will be any damage done the drive home is a slow drive on small roads.

Leave a Comment

Your email address will not be published. Required fields are marked *